Only some vehicles produced before 2016 may require minor tweaks for E20 fuel: Gadkari
Advertisement
New Delhi, July 29 : Some Bharat Stage (BS)-III vehicles, which were introduced from April 1, 2005, and manufactured before 2016, may require certain rubber parts and gaskets to be replaced before being run on E20 petrol, Road Transport and Highways Minister Nitin Gadkari stated in the Rajya Sabha on Wednesday.
In a written reply to a question in the Upper House, Gadkari said that extensive studies conducted by Indian Oil Corporation, the Indian Institute of Petroleum (IIP), Dehradun, the Society of Indian Automobile Manufacturers (SIAM) and the Automotive Research Association of India (ARAI) found no need to modify engines of either cars or two-wheelers for the use of E20 fuel.
The studies showed that even older vehicles did not experience any significant changes in performance or abnormal wear and tear after operating on petrol blended with 20 per cent ethanol, the minister said.
"No issues were reported in parameters such as drivability, startability, metal compatibility, and plastic compatibility," Gadkari said.
"Only in case of testing done on BS-III vehicles introduced from 1st April, 2005, and manufactured prior to 2016, some rubber parts and gaskets may require replacement, which can be easily managed during the routine servicing regime of the vehicle," he observed.
Addressing concerns over fuel efficiency, Gadkari said automobile manufacturers and vehicle-testing agencies had clarified that mileage depends on multiple factors and cannot be attributed solely to the use of E20 fuel.
The minister further stated that an Inter-Ministerial Committee, constituted by NITI Aayog on December 26, 2020, had comprehensively examined vehicle compatibility as well as mileage and efficiency aspects of ethanol blending with petrol. The committee's assessment was supported by studies carried out by Indian Oil, ARAI and SIAM.
The committee’s report titled Roadmap for Ethanol Blending in India 2020-25 was released in June 2021 before the E20 fuel was introduced. It examined material compatibility, engine calibration, fuel systems, drivability, durability, emissions and fuel efficiency after consultations with automobile manufacturers, oil marketing companies and agricultural experts.
Gadkari said the Ethanol Blended Petrol (EBP) Programme has been implemented through a "phased, calibrated, scientifically validated and consultative approach."
He also highlighted that ethanol-blended fuel has been used globally for over a century, with countries such as Brazil operating on even higher ethanol blends for decades.
In a written reply to a question in the Upper House, Gadkari said that extensive studies conducted by Indian Oil Corporation, the Indian Institute of Petroleum (IIP), Dehradun, the Society of Indian Automobile Manufacturers (SIAM) and the Automotive Research Association of India (ARAI) found no need to modify engines of either cars or two-wheelers for the use of E20 fuel.
The studies showed that even older vehicles did not experience any significant changes in performance or abnormal wear and tear after operating on petrol blended with 20 per cent ethanol, the minister said.
"No issues were reported in parameters such as drivability, startability, metal compatibility, and plastic compatibility," Gadkari said.
"Only in case of testing done on BS-III vehicles introduced from 1st April, 2005, and manufactured prior to 2016, some rubber parts and gaskets may require replacement, which can be easily managed during the routine servicing regime of the vehicle," he observed.
Addressing concerns over fuel efficiency, Gadkari said automobile manufacturers and vehicle-testing agencies had clarified that mileage depends on multiple factors and cannot be attributed solely to the use of E20 fuel.
The minister further stated that an Inter-Ministerial Committee, constituted by NITI Aayog on December 26, 2020, had comprehensively examined vehicle compatibility as well as mileage and efficiency aspects of ethanol blending with petrol. The committee's assessment was supported by studies carried out by Indian Oil, ARAI and SIAM.
The committee’s report titled Roadmap for Ethanol Blending in India 2020-25 was released in June 2021 before the E20 fuel was introduced. It examined material compatibility, engine calibration, fuel systems, drivability, durability, emissions and fuel efficiency after consultations with automobile manufacturers, oil marketing companies and agricultural experts.
Gadkari said the Ethanol Blended Petrol (EBP) Programme has been implemented through a "phased, calibrated, scientifically validated and consultative approach."
He also highlighted that ethanol-blended fuel has been used globally for over a century, with countries such as Brazil operating on even higher ethanol blends for decades.
Advertisement
Note: The content of this article is sourced from a news agency and has not been edited by the ap7am team.